Our experience and expertise can turn your custom project from idea to reality: from start to finish.
Over the years, we have developed expertise in system architecture, component selection, schematic capture, printed circuit board layout, firmware development, prototype assembly, and mass production. We are well connected with both local and international printed circuit board manufacturers, assembling facilities, and certification laboratories. This allows us to provide a truly one-stop professional design and sub-contract service.
Versatile network gateway based on a 667MHz Intel IXP435 Network Processor.
This gateway features a Infineon 5-port 100BaseT Ethernet switch, dual USB 2.0 ports, standard 32-bit PCI slot, dual Mini-PCI expansion, CF and SD memory card storage. Internet connectivity is provided by up to four proprietary ADSL or ADSL2+ network modules.
ADSL module compliant with the ITU G.992.1, G.992.2 and ANSI T1.413 specifications.
This design is based on a STMicroelectronics ADSL chipset.
Maximum downstream rate is 8Mbps and upstream rate is 800kbps.
ADSL2/ADSL2+ module compliant with the ITU G.992.3, G.992.4 and G.992.5 specifications.
This design is based on an Ikanos ADSL2+ chipset.
Maximum downstream rate is 24Mbps and upstream rate is 1.1Mbps.
PTCRB certified Machine-to-Machine (M2M) device based on an ARM Cortex-M3 processor.
This device is capable of retrieving specific data from a ECU inside a vehicle through the OBD-II connector.
Cellular communication is provided through a Telit GSM/GPRS module and a surface mount antenna.